Weather station screen
This screen shows the real-time indoor and outdoor data on the top right of the screen, which is coming in from the attached weather station. The bottom right section shows the max/min values since the time the software was started.
The min/max in the demo version will be based on up to ten records.
It will depend on the station type as to how often the real time information is updated. The WS2300 tends towards a 30-second update whereas the WMR-928 updates more frequently.
Right-clicking on the image window will position the wind rose crosshair. Left-click does nothing in this view.
This image shows the software with the default UK map, supplied with the software for optional use as a local image. It is found in the 'Images' subdirectory under wherever you installed the software, called 'default.png'.
WMR-928 Extra sensors
You can also see here the channel information from WMR-928 extra sensors, if you have them. Use the channel buttons underneath the wind rose to switch between them. The temperature and humidity readings will change as appropriate. In the example shown here, the readings are for channel 2 and the temperature is above the alarm setting, hence it is shown in red.
These buttons do not appear if you do not have a WMR-928 station.
